Torii Tower P2 (pair)

Overview

Because of the success of our entry level Torii kit, we wanted to introduce a small tower to the lineup. Customer feedback was split between a sealed design with more woofers and a ported design with less, so we stepped up and delivered both. We are excited to announce the launch of our Torii Tower S4 and P2.

Both are 3-way designs that utilize the same drivers as the current Torii for as close a voice match as possible. With only 2 woofers instead of 4, the Torii Tower P2 utilizes the extra cabinet volume to extend deeper in the bass, all the way down to 32 Hz anechoic. This is a true, full-range small tower that will not require a subwoofer for music. With 2 less woofers, it comes in at a more affordable price and makes an ideal choice for a low cost 2-channel system. We've taken customer feedback and went with a front ported design so the ports are not blocked when placing against a wall.

Key Features

• 3-way design for lower midrange distortion
• Ported f3 of 32 Hz
• Front ported
• No subwoofer required for music
• 4 Ohm load
• More affordable than the Torii Tower S4

Torii Tower S4 vs P2 Comparison

Specifications

• 3-way Crossover
• Anechoic Frequency Response: 32 Hz to 20 kHz +/- 3 dB
• In-room Frequency Response: 20 Hz to 20 kHz
• Sensitivity: 88.5 dB
• Nominal Impedance: 4 Ohm
• Minimum Impedance: 3.3 Ohms
• Assembled dimensions: 36 x 7.5 x 14 inches H x W x D
• Assembled weight: 36 pounds each

Cabinet Plans